The CW Dual-In-Line Plug (DIP) connector is used for rapid, permanent connection of ribbon cable to a PC board or to a standard DIP socket when connect/disconnect capabilities are required. The cover is factory pre-assembled to the connector base to simplify assembly to cable and has ridges for cable alignment.
CW’s DIP connectors feature a one-piece construction in 14, 16, 24 and 40 pin versions. Our patented Torq-Tite™ contacts ensure reliable gas-tight terminations and accept 28-30AWG stranded or solid conductors. Optional strain reliefs are easily installed.
Images
Features
Specs
Specifications
- Contacts: Phosphor bronze, standard
- Contact Plating:
- 10Au micro inches in Mating Area/50Ni
- 30Au micro inches in Mating Area/50Ni
- 100Sn micro inches in Mating Area/50Ni
- Insulator Material: UL94V-0 flame retardant thermoplastic.
- Strain Relief Strap Material: Tin-plated steel
- Color: Blue
- Operating Temperature: -55° C to +125° C
- Current Rating: 1A (maximum) per contact
- Dielectric Withstand Voltage: Greater than 500 VDC at sea level.
- Insulation Resistance: Greater than 5x10⁹ ohms
- Mates with .050 in. centered round conductor flat cable and standard DIP socket with .100 in. x .300 in. or .100 in. x .600 in. contact spacing.
- Cover Pull-off Force with Strain Relief 20lb. minimum. (force along contacts primary axes)
Approvals
UL Recognized
CSA Certified