Socket connectors are typically used to interconnect PC boards or points on a backplane through headers or pins on .100 in. × .100 in. spacing.
They feature an advanced mechanical design which includes CW's patented offset-tine (Torq-Tite™) contact for positive gas-tight cable termination. The nose end of the contact provides a long, dual cantilever for a longer wiping action and improved self-cleaning of the mating pin. The extra length also results in a longer and more reliable working life.
The reassembled cover design allows fast, reliable assembly to extruded, bonded, or laminated cable and features built-in cable alignment. These features permit the use of simplified termination equipment.
Images
Features
Specs
Specifications
Specifications
- Contacts: Phosphor bronze, standard
- Contact Plating:
- 10Au micro inches in Mating Area/50Ni
- 30Au micro inches in Mating Area/50Ni
- 50Au micro inches in Mating Area/50Ni
- 100Sn micro inches in Mating Area/50Ni
- Insulator Material: UL94V-0 flame retardant thermoplastic
- Color: Blue
- Strain Relief Strap Material: Insulated Stainless Steel
- Color: Blue
- Operating Temperature: -55° C to +125° C
- Current Rating: 1A (maximum) per contact
- Dielectric Withstand Voltage: Greater than 500 VDC at sea level.
- Insulation Resistance: Greater than 5x10⁹ ohms
- Withdrawal Force: 2-8oz/contact, typical
- Cover Pull-off Force: 8oz/contact minimum. (force along contacts primary axes)
- U.S. Defense Department Mil-DTL-83503/7 approved.
Approvals
UL Recognized
CSA Certified